Hikvision Digital Technology DS-2CD4065F-A Manual do Utilizador

Network Camera User Manual V5.2.0 UD.6L0201D1514A01

User Manual of Network Camera 9 Chapter 1 System Requirement Operating System: Microsoft Windows XP SP1 and above version / Vista / Win7 / Server

User Manual of Network Camera 99 Figure 6-64 People Counting Configuration 2. Select People Counting Configuration tab to set the detailed paramete

User Manual of Network Camera 100 Generation Speed (Time) [0~100]: The speed of the head or should be treated as a target. If you set the value lower

User Manual of Network Camera 101 1. Click People Counting Statistics to enter the data statistics interface. 2. Select the report type by clicking

User Manual of Network Camera 102 Chapter 7 Storage Settings Before you start: To configure record settings, please make sure that you have the net

User Manual of Network Camera 103 Please refer to the User Manual of NAS for creating the file path. (4) Click Save to add the network disk. 2. Init

User Manual of Network Camera 104 Figure 7-4 Quota Settings Notes:  Up to 8 NAS disks can be connected to the camera.  To initialize and use t

User Manual of Network Camera 105 Figure 7-5 Recording Schedule Interface 2. Check the checkbox of Enable Record Schedule to enable scheduled recor

User Manual of Network Camera 106 The Post-record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min. Note: The record paramete

User Manual of Network Camera 107 If you select Continuous, the video will be recorded automatically according to the time of the schedule.  Record

User Manual of Network Camera 108 Figure 7-8 Edit Record Schedule (3) Check the checkbox of Select All and click Copy to copy settings of this day t

User Manual of Network Camera 10 Chapter 2 Network Connection Before you start:  If you want to set the network camera via a LAN (Local Area Net

User Manual of Network Camera 109 Check the Enable Event-triggered Snapshot checkbox to check event-triggered snapshot. 3. Select the quality of the

User Manual of Network Camera 110 Figure 7-9 Snapshot Settings

User Manual of Network Camera 111 Chapter 8 People Counting Compared with the people counting function supported by the iDS camera, the people coun

User Manual of Network Camera 112 6. Configure the Detection Sensitivity [0~100]. It refers to the sensitivity of the camera recognize a target. The

User Manual of Network Camera 113 Figure 8-2 Statistics Result

User Manual of Network Camera 114 Chapter 9 Playback Purpose: This section explains how to view the remotely recorded video files stored

User Manual of Network Camera 115 Figure 9-3 Playback Toolbar Table 9-1 Description of the buttons Button Operation Button Operation Play Capture

User Manual of Network Camera 116 Chapter 10 Log Searching Purpose: The operation, alarm, exception and information of the camera can be stored in

User Manual of Network Camera 117 Chapter 11 Others 11.1 Managing User Accounts Enter the User Management interface: Configuration >Basic Config

User Manual of Network Camera 118 Figure 11-2 Add a User  Modify a User Steps: 1. Left-click to select the user from the list and click Modify.

User Manual of Network Camera 11 Figure 2-2 Connecting via a Switch or a Router 2.1.2 Detecting and Changing the IP Address You need the IP address

User Manual of Network Camera 119 Figure 11-3 Modify a User  Delete a User Steps: 1. Click to select the user you want to delete and click Delete

User Manual of Network Camera 120 Note: If you disable the RTSP authentication, anyone can access the video stream by the RTSP protocol via the IP

User Manual of Network Camera 121 Note: Only live view is available for the anonymous user. 11.4 IP Address Filter Purpose: This function makes it

User Manual of Network Camera 122 Figure 11-8 Add an IP (3) Click the OK to finish adding.  Modify an IP Address Steps: (1) Left-click an IP addres

User Manual of Network Camera 123 2. Check the checkbox of Enable Telnet to enable the remote login by the telnet, and uncheck the checkbox to disab

User Manual of Network Camera 124 11.7 Maintenance 11.7.1 Rebooting the Camera Steps: 1. Enter the Maintenance interface: Configuration > Basic C

User Manual of Network Camera 125 Configuration file is used for the batch configuration of the camera, which can simplify the configurat

User Manual of Network Camera 126 Figure 11-15 Remote Upgrade Note: The upgrading process will take 1~10 minutes. Please don't disconnect pow

User Manual of Network Camera 127 11.9 RS-485 Settings Purpose: The RS-485 serial port is used to control the PTZ of the camera. The configuring of t

User Manual of Network Camera 128 Appendix Appendix 1 SADP Software Introduction  Description of SADP V 2.0 SADP (Search Active Devices Protocol) i

User Manual of Network Camera 12 Figure 2-3 SADP Interface 2.2 Setting the Network Camera over the WAN Purpose: This section explains how to connec

User Manual of Network Camera 129 searched devices will be added to the list. Note: You can click or on each column heading to order the in

User Manual of Network Camera 130 Note: Serial code is a series of characters combined by the start time and the serial number of the device. 2. Inp

User Manual of Network Camera 131 Appendix 2 Port Mapping The following settings are for TP-LINK router (TL-WR641G). The settings vary depe

User Manual of Network Camera 132 another camera as 81, 8001, 555, 8201 with IP 192.168.1.24. Refer to the steps as below: Steps: 1. As the setting

User Manual of Network Camera 133

User Manual of Network Camera 13 2. Assign a LAN IP address, the subnet mask and the gateway. Refer to Section 2.1.2 Detecting and Changing the IP A

User Manual of Network Camera 14 1. Connect the network camera to the router. 2. In the camera, assign a LAN IP address, the subnet mask and the

User Manual of Network Camera 15 Figure 2-7 Normal Domain Name Resolution Steps: 1. Apply a domain name from a domain name provider. 2. Configure

User Manual of Network Camera 16 Chapter 3 Access to the Network Camera 3.1 Accessing by Web Browsers Steps: 1. Open the web browser. 2. Input t

User Manual of Network Camera 17 Figure 3-2 Download and Install Plug-in Figure 3-3 Install Plug-in (1) Figure 3-4 Install Plug-in (2) Note: You m

User Manual of Network Camera 18 3.2 Accessing by Client Software The product CD contains the iVMS-4200 client software. You can view the live vid

User Manual of Network Camera 1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the

User Manual of Network Camera 19 Figure 3-6 iVMS-4200 Configuration Panel Note: For detailed information about the software, please refer to the use

User Manual of Network Camera 20 Chapter 4 Wi-Fi Settings Purpose: By connecting to the wireless network, you don’t need to use cable of any ki

User Manual of Network Camera 21 4. Check the checkbox to select the Network mode as Manage, and the Security mode of the network is automatically s

User Manual of Network Camera 22 Figure 4-5 Ad-hoc Connection Point 6. Choose the SSID and connect. Security Mode Description: Figure 4-6 Securi

User Manual of Network Camera 23 the method used by your access point. Not all access points have this option, in which case they probably use Open S

User Manual of Network Camera 24 Figure 4-9 EAP-TLS  Identity - Enter the user ID to present to the network.  Private key password – Enter the p

User Manual of Network Camera 25 WPS (Wi-Fi Protected Setup) refers to the easy configuration of the encrypted connection between the device and the

User Manual of Network Camera 26 4. Push the WPS button to enable the function on the camera. If there is not a WPS button on the camera, you can

User Manual of Network Camera 27 3. Click Connect. Or You can generate the PIN code on the camera side. And the expired time for the PIN code is 120

User Manual of Network Camera 28 Chapter 5 Live View 5.1 Live View Page Purpose: The live view page allows you to view the real-time video, captur

User Manual of Network Camera 2 This manual may contain several technical incorrect places or printing errors, and the content is subject to change

User Manual of Network Camera 29 Click each tab to adjust the layout and the stream type of the live view. And you can click the drop-down to sel

User Manual of Network Camera 30 Live view with the third stream. Click to select the third-party plug-in. Manually capture the picture. / Manu

User Manual of Network Camera 31 Figure 5-3 PTZ Control Panel Click the zoom/iris/focus buttons to realize lens control. Notes:  There are 8 dir

User Manual of Network Camera 32 2. Use the PTZ control buttons to move the lens to the desired position. • Pan the camera to the right or left. • T

User Manual of Network Camera 33 1. Click to enter the patrol configuration interface. 2. Select a path No., and click to add the configured

User Manual of Network Camera 34 Chapter 6 Network Camera Configuration 6.1 Configuring Local Parameters Note: The local configuration refers to t

User Manual of Network Camera 35 streaming under some network environments. MULTICAST: It’s recommended to select MCAST type when using the Multicast

User Manual of Network Camera 36 6.2 Configuring Time Settings Purpose: You can follow the instructions in this section to configure the time sync

User Manual of Network Camera 37 Figure 6-3 Time Sync by NTP Server Note: If the camera is connected to a public network, you should use a NTP serve

User Manual of Network Camera 38 6.3 Configuring Network Settings 6.3.1 Configuring TCP/IP Settings Purpose: TCP/IP settings must be properly confi

User Manual of Network Camera 3 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply

User Manual of Network Camera 39 and Multicast Address. Notes:  The valid value range of MTU is 500 ~ 1500.  The Multicast sends a stream to

User Manual of Network Camera 40 HTTPS Port: The default port number is 443, and it can be changed to any port No. which is not occupied. Server Port

User Manual of Network Camera 41 Registration on the DDNS server is required before configuring the DDNS settings of the camera. Steps: 1. Enter the

User Manual of Network Camera 42 Figure 6-10 DynDNS Settings  IP Server: Steps: (1) Enter the Server Address of the IP Server. (2) Click Save to s

User Manual of Network Camera 43 Figure 6-12 NO-IP Settings (2) Enter the Server Address as www.noip.com (3) Enter the Domain name you registered. (

User Manual of Network Camera 44 6.3.5 Configuring SNMP Settings Purpose: You can set the SNMP function to get camera status, parameters and alarm r

User Manual of Network Camera 45 Figure 6-14 SNMP Settings 2. Check the corresponding version checkbox ( , , ) to enable the feature. 3. Configur

User Manual of Network Camera 46 6.3.6 Configuring 802.1X Settings Purpose: The IEEE 802.1X standard is supported by the network cameras, and when t

User Manual of Network Camera 47 6.3.7 Configuring QoS Settings Purpose: QoS (Quality of Service) can help solve the network delay and network conge

User Manual of Network Camera 48 and the camera is connected to the Wide Area Network via the router. Steps: 1. Enter the UPnP™ settings interface.

User Manual of Network Camera 4 Safety Instruction These instructions are intended to ensure that the user can use the product correctly to avoid dan

User Manual of Network Camera 49 Figure 6-18 Email Settings 3. Configure the following settings: Sender: The name of the email sender. Sender’s Add

User Manual of Network Camera 50 Authentication (optional): If your email server requires authentication, check this checkbox to use authentication t

User Manual of Network Camera 51 6.3.11 Configuring FTP Settings Purpose: You can configure the FTP server related information to enable the uploadin

User Manual of Network Camera 52 3. Click Save to save the settings. Note: If you want to upload the captured pictures to FTP server, yo

User Manual of Network Camera 53 Configuration > Advanced Configuration > Network > HTTPS 2. Create the self-signed certificate or author

User Manual of Network Camera 54 Note: If you already had a certificate installed, the Create Self-signed Certificate is grayed out.  Create the

User Manual of Network Camera 55 Figure 6-25 Configure Video Settings 2. Select the Stream Type of the camera to main stream (normal), sub-stream or

User Manual of Network Camera 56 A higher frame rate is advantageous when there is movement in the video stream, as it maintains image quality throug

User Manual of Network Camera 57 Or Configuration > Advanced Configuration > Video / Audio > Audio Figure 6-26 Audio Settings 2. Configure

User Manual of Network Camera 58 Figure 6-27 Region of Interest Settings 2. Draw the region of interest on the image. There are four regions can be

User Manual of Network Camera 5 Cautions:  Make sure the power supply voltage is correct before using the camera.  Do not drop the camera or su

User Manual of Network Camera 59  The dynamic region refers to the ROI defined by intelligent analysis such as human face detection. You can choose

User Manual of Network Camera 60 sets of parameters for user to configure. Day/night Auto-switch Figure 6-29 Display Settings of Day/night Auto-

User Manual of Network Camera 61 is selectable, e.g.: Tamron 2.8-8mm F1.2 (M13VP288-IR), or if DC lens is adopted, then manual and auto are selectabl

User Manual of Network Camera 62 Triggered by alarm input: The switch is triggered by alarm input, and you can set the triggered mode to day or night

User Manual of Network Camera 63 Mode and Expert Mode are selectable. Set the DNR level from 0~100, and the default value is 50 in Normal Mode. Set t

User Manual of Network Camera 64 Figure 6-32 Day/Night Scheduled-Switch Configuration Interface Steps: 1. Click the time line to select the start

User Manual of Network Camera 65 Figure 6-33 OSD Settings 2. Check the corresponding checkbox to select the display of camera name, date or week if

User Manual of Network Camera 66 Figure 6-35 Adjust OSD Location 7. Click Save to activate the above settings. 6.5.3 Configuring Text Overlay Sett

User Manual of Network Camera 67 2. Check the checkbox in front of textbox to enable the on-screen display. 3. Input the characters in the textbox.

User Manual of Network Camera 68 5. Click Stop Drawing to finish drawing or click Clear All to clear all of the areas you set without saving them. 6

User Manual of Network Camera 6 Table of Contents Chapter 1 System Requirement ...

User Manual of Network Camera 69 6.6 Configuring and Handling Alarms This section explains how to configure the network camera to respond to alarm e

User Manual of Network Camera 70 Configuration > Advanced Configuration> Events > Motion Detection (2)Check the checkbox of Enable Motion De

User Manual of Network Camera 71 Figure 6-40 Arming Time (1)Click Edit to edit the arming schedule. The Figure 6-34 shows the editing interface of t

User Manual of Network Camera 72 3. Set the Alarm Actions for Motion Detection. Check the checkbox to select the linkage method. Notify sur

User Manual of Network Camera 73 detailed information.  Trigger Alarm Output Trigger one or more external alarm outputs when an event occurs. Note:

User Manual of Network Camera 74  Day/Night Auto-Switch Steps: (1) Draw the detection area as in the normal configuration mode. Up to 8 areas are

User Manual of Network Camera 75 Figure 6-45 Day/Night Scheduled-Switch (3) Select the start time and the end time for the switch timing. (4) Select

User Manual of Network Camera 76 Figure 6-46 Video Tampering Alarm 2. Check Enable Video Tampering checkbox to enable the video tampering

User Manual of Network Camera 77 2. Choose the alarm input No. and the Alarm Type. The alarm type can be NO (Normally Open) and NC (No

User Manual of Network Camera 78 Configuration>Advanced Configuration> Events > Alarm Output 2. Select one alarm output channel in the Alar

User Manual of Network Camera 7 6.3.9 Email Sending Triggered by Alarm ...

User Manual of Network Camera 79 Steps: 1. Enter the Exception Settings interface: Configuration > Advanced Configuration> Events > Excepti

User Manual of Network Camera 80 Figure 6-50 Face Detection Interface Steps: 1. Enter the face detection settings interface: Configuration &

User Manual of Network Camera 81 5. Configure the linkage action for face detection. Note： The face detection is only supported by a certain series

User Manual of Network Camera 82 Figure 6-51 Audio Exception Configuration 6.6.8 Configuring Line Crossing Detection This function can be used for

User Manual of Network Camera 83 Figure 6-52 Draw Crossing Line And you can select the directions as A<->B, A ->B, and B->A. A<->

User Manual of Network Camera 84 Steps: 1. Check the Enable Intrusion Detection checkbox. 2. Click Draw Area, and then draw a rectangle on the imag

User Manual of Network Camera 85 enabled. 1. Click Edit to set the arming schedule. 2. Choose to trigger alarm actions as Notify Surveillance Cente

User Manual of Network Camera 86 change of scene can trigger the alarm. Arming Schedule is configured to set the time you want the function to be e

User Manual of Network Camera 87 Figure 6-56 Behavior Analysis  VCA Info Behavior Analysis Version: It lists the version of the algorithms library

User Manual of Network Camera 88 1. Check the checkbox of Camera Calibration to enable this function. 2. Select the calibration mode as Input Basic

User Manual of Network Camera 8 Chapter 11 Others ... 1

User Manual of Network Camera 89 1. Click Shield Region tab to enter the shield region configuration interface. 2. Click Draw Area. Draw area by le

User Manual of Network Camera 90 Steps: 1. Click Rule Tab to enter the rule configuration interface. 2. Check the checkbox of Rule to enable rules

User Manual of Network Camera 91 Figure 6-59 Advanced Configuration Detection Sensitivity [0~4]: Refers to the sensitivity of the camera detects a t

User Manual of Network Camera 92 2. Select the Filter Type as Actual Size or Pixel. Actual Size: Input the length and width of both the ma

User Manual of Network Camera 93 Figure 6-60 Face Capture  VCA Info Face Capture Version: It lists the version of the algorithms library. Disp

User Manual of Network Camera 94  Rule Steps: 1. Check the checkbox of Rule to enable rules of face capture. 2. Click Minimize Pupil Distance to

User Manual of Network Camera 95 every frame. Capture Sensitivity [0~20]: The threshold the camera treats the target as a face. Only when the face sc

User Manual of Network Camera 96 6.7.3 Heat Map Heat map is a graphical representation of data represented by colors. The heat map function of the c

User Manual of Network Camera 97 Detection Sensitivity [0~100]: It refers to the sensitivity of the camera identify a target. The over-high sensitivi

User Manual of Network Camera 98 Figure 6-63 Space Heat Map Notes:  As shown in the figure above, red color block (255, 0, 0) indicates the most